1. Close supervision is necessary when this appliance is used by or near children.



2. This pump is designed to pump air. Do not, under any circumstances, attempt to operate this pump with water or other liquids. Any ingress of water or liquids can result in an electric shock and damage to the pump.



3. The operating temperature range for this pump is between 41°F (5°C) and 104°F (40°C).



4. Do not block the air being discharged. The pump must have sufficient room to allow proper heat dissipation. Operation of the pump in temperatures outside the recommended temperature range may result in malfunction and/or severely shortened service life.



5. Always turn off power and remove plug from socket before carrying out any service or maintenance. To remove plug from socket, grasp the plug body and pull. Do not try to remove by pulling on supply cord.



6. Use of unauthorized replacement parts may jeopardize safety.



7. This pump is intended for indoor use only.



8. Ensure pump is securely mounted prior to operation.



9. Read and observe all important markings on pump.



10. Ensure that extension cords (if required) have the correct or higher rating (amperes or watts). Ensure cord is properly positioned to avoid tripping.



11. During operation, do not touch the lower housing with bare hands as the temperature may increase up to 70°C. (This temperature will not affect the performance of the pump but may cause burns.)