BioLife 35/55 Internal Wet/Dry Power Filter Manual
Operation
Bio-Life is simple to operate. Install into aquarium as in illustration 4 and 5 or 6. Before plugging the heater into power allow it to adjust to water temperature for approximately 20 minutes. The pump may be plugged in immediately. Adjust output deflector to desired angle for current generation.
|
Unplug all electrical items in the aquarium before placing hands in tank. The use of a Ground Fault Interrupter (G.F.I.) for all electrical accessories is recommended. Whenever the unit is removed from the aquarium for maintenance, always unplug the heater at least 20 minutes before to ensure the heater core is cool and will not crack the glass tube due to a rapid temperature change when exposed to air. |
| 
